Enjoy Healthier, Cleaner, Better Tasting Drinking Water!
Multi-Pure Undersink Water Filters
Shop With Us and Save On Multi-Pure Under Sink Water Filtration Systems
Using Our Multi-Pure Coupons 414220-disc or 414220-disc2
|
Multi-Pure Undersink Water Filtration Systems Are Convenient, Easy To Use, Providing Superior Performance and Cost Efficiency... Multi-Pure MP880EL 0.5 Micron Solid Carbon Block Undersink Water Filter Complete With Filter, |
|
Effective and Cost Efficient - Operates For Just 5 Cents Per Gallon! |
|
Reduce Arsenic In Your Drinking Water Multi-Pure MP880SB 0.5 Micron Solid Carbon Block Undersink Water Filteration System Complete With Filter
|
| Our Most Popular Water Filter MP750SB  Multi-Pure MP750SB 0.5 Micron Solid Carbon Block Undersink Water Filter Comes CompleteWith Stainless Steel Housing, Filter, Chrome Plated Stainless Lead Free Faucet, and All Nec. Hardware. Convenient and Easy To Use.. Capacity Rating: 750 Gallons... Does Not Remove Healthy Minerals Lifetime Warranty... NSF Certification More Information  List Price: Special Discount - "Add To Cart" To See Our Low Price Enter Multi-Pure Coupon Code 414220-disc and Recalculate To See Your Savings! Request Your Free Gift In "Ordering Instuctions" During Checkout Custom Color Designer Faucets Are Available For An Additional $25.00  Back To Home Page MultiPure Takes Great Pride In Producing Water Filters That Meet The Strict Standards Of The NSF Certification... All Multi-Pure Drinking Water Filters Are NSF Certified!!! Quick and Easy! Compare Any NSF Certified Water Filters - Compare Before You Buy... Multi Pure Water Filters Are Tried, Tested, Proven, and NSF Certified.
Since 1970, Multi-Pure has been a leader in the water filtration industry producing solid carbon block drinking water filtration products. Multi-Pure Solid Carbon Block technology reduces a much wider range of contaminants of health concern than other water filters on the market today. If you are looking for a water filter that produces healthier, better tasting drinking water, MultiPure is without a doubt, Your best choice in a water filter.
 NSF International set the standards and provides 3rd party testing of water filtration products... NSF tests the quality and performance of water filters. NSF also monitors the manufacturing process. MultiPure Water Filters are tested, proven, and certified by NSF....
Multi Pure Solid Carbon Block Water Filters are tested according to NSF/ANSI Standard 53 - Health Effects for the reduction of:
Alachlor 98%
Asbestos 99.9%
Atrazine 97%
Benzene 99%
Bromodichloromethane 99.8%
Bromoform 99.8%
Carbofuran 99%
Carbon Tetrachloride 98%
Chlordane 99.5%
Chlorobenzene 99%
Chloropicrin 99%
Chloroform 99.8%
Cryptosporidium Cysts 99.95%
Giardia Cysts 99.95%
Entamoeba 99.95%
Toxoplasma 99.95%
2, 4-D 98%
DBCP 99%
1,2-DCA 95%
1,1-DCE 99%
Dibromochloromethane
(TTHM: Chlorodibromomethane) 99.8%
Dibromochloropropane (DBCP) 99%
o-Dichlorobenzene
(1,2 Dichlorobenzene) 99%
p-Dichlorobenzene
(para-Dichlorobenzene) 98%
1,2-Dichloroethane (1,2-DCA) 95%
1,1-Dichloroethylene (1,1-DCE) 99%
Cis-1,2-Dichloroethylene 99%
Trans-1,2-Dichloroethylene 99%
1,2-Dichloropropane
(Propylene Dichloride) 99%
CIS-1,3-Dichloropropylene 99%
Dinoseb 99%
EDB (see Ethylene Dibromide) 99%
Endrin 99%
Ethylbenzene 99%
Ethylene Dibromide (EDB) 99%
Furadan (see Carbofuran) 99%
Haloacetonitriles (HAN)
Bromochloroacetonitrile 98%
Dibromoacetonitrile 98%
Dichloroacetonitrile 98%
Trichloroacetonitrile 98%
Haloketones (HK)
1,1-Dichloro-2-Propanone 99%
1,1,1-Trichloro-2-Propanone 96%
Heptachlor 99%
Heptachlor epoxide 98%
Hexachlorobutadiene 99%
Lead (ph 6.5) 99.3%
Lead (ph 8.5) 99.3%
Lindane 99%
Mercury (ph 6.5) 99%
Mercury (ph 8.5) 99%
Methoxychlor 99%
Methylbenzene (see Toluene) 99%
Monochlorobenzene (see Chlorobenzene) 99%
MTBE (methyl tert-butyl ether) 96.6%
Polychlorinated Biphenyls (PCB's, Aroclor 1260) 99.9%
PCE (see Tetrachloroethylene) 99%
Pentachlorophenol 99%
Perchlorobutadiene (see Hexachlorobutadiene) 98%
Propylene Dichloride (see 1,2-Dichloropropane) 99%
Simazine 97%
Silvex (see 2,4,5-TP) 99%
Styrene (Vinylbenzene) 99%
1,1,1-TCA (see 1,1,1 - Trichloroethane) 95%
TCE (see Trichloroethylene) 99%
1,1,2,2- Tetrachloroethane 99%
Tetrachloroethylene 99%
Toluene (Methylbenzene) 99%
Toxaphene 92.9%
Toxoplasma 99.95%
2,4,5-TP (Silvex) 99%
Tribromoacetic Acid
1,2,4 Trichlorobenzene (Unsymtrichlorobenzene) 99%
1,1,1 - Trichloroethane (1,1,1-TCA) 95%
1,1,2-Trichloroethane 99%
Trichloroethylene (TCE) 99%
Trihalomethanes (TTHM) (Chloroform; Bromoform;
Bropmodichloromethane; Dibromochloromethane) 99.8%
Turbidity 99%
Unsym-Trichlorobenzene (see 1,2,4,-Trichlorobenzene) 99%
Vinylbenzene (see Styrene) 99%
Xylenes (Total) 99%
NSF/ANSI 42- Aesthetic Effects
Chloramine as Aesthetic Effect (as Monochloramine) 97%
Chlorine as Aesthetic Effect 99%
Particulate, (Nominal Particulate Reduction, Class 1, Particles 0.5 to<1 UM) Class 1 = 99%
Multi-Pure's MP880 Series has benn tested according to NSF/ANSI Standard 53 for the reduction of the following
substances. (This is in addition to all the above contaminants under Standard 53 and 42 )
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system.
Arsenic (pentavalent As (V); As (+5); arsenate@ 6.5 ph 99.9%
Arsenic (pentavalent As (V); As (+5); arsenate@ 8.5ph 95.8%
NSF/ANSI Standard 58 - Reverse Osmosis
MultiPure's MP750PlusRO has been tested according to NSF/ANSI Standard 58 for the reduction of the following substances. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 58.
Arsenic V (pentavalent AS (V); As (+5); arsenate) 98.4%
Barium 97.9%
Cadmium 98.6%
Chromium, Hexavalent 91.3%
Chromium, Trivalent 94.1%
Copper 99.0%
Cysts (Giardia; Cryptosporidium: Entamoeba: Toxoplasma) 99.99%
Fluoride 93.9%
Lead 98.6%
Nitrate 76.54%
Nitrite 82.14%
Nitrate/Nitrite 82.14%
Perchlorate 96.5%
Radium 226/228 80.0%
Selenium 92.0%
Total Dissolved Solids (TDS) 96.8%
|
| NSF provides third-party conformity assessment services while representing the interests of all stakeholders. The primary stakeholder groups include industry, the regulatory community, and the public at large. For more information, call (734) 769-8010 or visit www.nsf.org. NSF certification of home water treatment covers four major areas. 1) Systems (and some components such as housings) that are intended for installation on a pressurized water line are checked for structural integrity to ensure they do not leak or crack. 2) Both complete systems and components can also go through extraction testing, which is a process that involves exposing the wetted parts (the parts that are intended for contact with the water, such as the inside of the housing, the filter media, etc.) to an aggressive test water to determine if any heavy metals or other impurities are being introduced. The standards limit the amount of impurities that a certified system can introduce, with the maximum allowed concentrations being based on US EPA or Health Canada drinking water limits. 3) Testing is available on assembled systems to verify if the product being tested is truly effective at reducing the contaminants being claimed by the manufacturer. A list of the contaminant testing protocols that are used to validate performance can be found in the pages of our website at www.nsf.org/consumer/drinking_water. 4) Lastly, NSF will also verify the accuracy of the labeling on the packaging of NSF Certified systems to ensure it does not contain any false or misleading statements. While performance testing is done on a pass/fail basis, if a company chooses to put percentages on the product packaging, we will ensure they do match the official test results that specific product achieved. If you would like more information on NSF's drinking water treatment program, you can visit their web site at http://www.nsf.org See NSF's Official Listing Of Contaminants Reduced By Multi-Pure Water Filters See The NSF Video Performance Data Sheet For MultiPure Water Filters Multi-Pure Models MP750SB, MP1200EL, MP750SC, MP750SI, MPAD, MPCT Have Been Tested And Certified By NSF Alachlor 98% Approximate Service Capacity - Model MP750 - 750 gallons Model 1200EL- 1200 gallons MPAD - 750 gallons
2. The Multi-Pure Drinking Water Systems have been certified by the State of California Department of Health Services 3. Chloroform was used as a surrogate for claims of reduction of VOCs. MultiPure Systems tested at >99.8% actual 4. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or
5. Filter life will vary in proportion to the amount of water used and the level of impurities in the water being processed. For optimum performance, it is essential that the filter be replaced on a regularly scheduled basis as follows: (a) annually; (b) when the unit’s 6. MultiPure Model No. MP1200EL includes a capacity monitor that automatically flashes a yellow light when it is time to replace 7. Multi-Pure Drinking Water Filtration Housings are warranted for Lifetime (*provided that the internal water filter be replaced at least 8. Please see the MultiPure Owner’s Manual for installation instructions and operating procedures of the water filter. 9. In compliance with New York law, it is recommended that before purchasing a water purification system, NY residents have their 10. Check for compliance with state and local laws and regulations that apply to water filters. 11. While testing was performed under standard laboratory conditions, actual performance may vary to some degree depending
Operational Specifications For Multi-Pure Water Filters - MP880SB MP880SC MP880SI MP880EL Approximate Service Capacity (6) 600 Gallons 600 Gallons 600 Gallons 960 Gallons Replacement Filter Model No./ Approx. Cost CB11AS/$110 CB11AS/$110 CB11AS/$110 CB11AS/$110 Approximate Flow Rate @ 60 psi 1.0 gpm 1.0 gpm 1.0 gpm 1.0 gpm Maximum Water Pressure 100 psi/7.03 kg/cm2 100 psi/7.03 kg/cm2 100 psi/7.03 kg/cm2 100 psi/7.03 kg/cm2 Minimum Water Pressure 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2 Maximum Operating Temperature 100°F/38°C for cold water use only... Minimum Operating Temperature 32°F/0°C Multi-Pure Model No. MP750PlusRO Drinking Water Systems have been tested and certified under NSF Standard Nos. 42, 53 and 58 as shown below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53, Health Effects. NSF/ANSI 42 - Aesthetic Effects MultiPure Water Filter Model MP750PlusRO has been tested according to NSF/ANSI Standard 42 for the reduction of the following substances. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system. Alachlor 98%
NSF/ANSI 58 - Reverse Osmosis Multi-Pure Reverse Osmosis Water Filters Model MP750PlusRO have been tested according to NSF/ANSI Standard 58 for the reduction of the following substances. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 58 Arsenic V (pentavalent As (V); As(+5); arsenate) 98.4% 0.30 +/- 10% 0.010
Total Dissolved Solids (TDS) 96.8% 750 +/- 40 mg/L 187 NSF/ANSI 58 - Reverse Osmosis MultiPure Reverse Osmosis Water Filters Model MP750PlusRO have been tested according to NSF/ANSI Standard 58 for the reduction of the following substances. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 58. NOTES: 1. Multi-Pure Drinking Water Systems have been certified, as indicated, by NSF International for compliance to NSF/ANSI Standard 2. This Multi-Pure Drinking Water System(s) have been certified by the State of California Department of Health Services for the 3. Chloroform was used as a surrogate for claims of reduction of Volatile Organic Chemicals (VOC). Multi-Pure Systems tested at 4. Do not use with water that is microbiologically unsafe or with water of unknown quality without adequate disinfection 5. The System may be used with municipal or well water sources that are treated and tested on a regular basis to ensure 6. Do not allow water to freeze in the unit. If unit is exposed to freezing temperatures, drain water from unit and remove filters. 7. Do not allow water to sit in unit for extended periods of time (10 or more days) without being used. If unit is to be left unused for 8. Multi-Pure Drinking Water System Housings are warranted for Lifetime (provided that the filter be replaced at least once a year). 9. Please see the Owner’s Manual for installation instructions and operating procedures. 10. In compliance with New York law, it is recommended that before purchasing a water treatment system, NY residents have their 11. Check for compliance with state and local laws and regulations. 12. While testing was performed under standard laboratory conditions, actual performance may vary. 13. The list of substances which the treatment device reduces does not necessarily mean that these substances are present in your 14. This system is acceptable for treatment of influent concentrations of no more than 27 mg/L nitrate and 3 mg/L nitrite in 15. This system has been tested for the treatment of water containing pentavalent arsenic (also known as As(V), As(+5), or This system is to be used on water supplies containing a detectable free chlorine residual at the system inlet or on water supplies that have been demonstrated to contain only pentavalent arsenic. Treatment with chloramine (combined chlorine) is not sufficient to ensure complete conversion of trivalent arsenic to pentavalent arsenic. Please see the Arsenic Facts section of the Performance Data Sheet for further information. Multi-Pure Reverse Osmosis Water Filters Model MP750PlusRO Operation and Maintenance Specifications Depending on water chemistry, water temperature, and water pressure, the MultiPure Reverse Osmosis Water Filters MP750PlusRO Reverse Osmosis Systems production and performance will vary. Refer to Owner’s Manual for further maintenance requirements and warranty information General Use Conditions: Maximum Operating Temperature 100°F / 40.5°C Minimum Operating Temperature 40°F /0°C Maximum Working Pressure 100 psi / 7.0 kg/cm2 The operating pressure in your home should be tested over a 24 hour period to attain the maximum pressure. If it is over 100 psi then a pressure regulator will be required. Minimum Working Pressure 40 psi / 2.8 kg/cm2 pH parameters 3 pH to 11 pH Iron 0.2 ppm maximum TDS (total dissolved solids) < 1800 ppm Turbidity < 5 NTU Hardness < 10 grains per gallon / 171 mg/L of hardness as CaCO3 MultiPure Reverse Osmosis Water Filters will operate with hardness over 10 grains, but the reverse osmosis membrane life may be shortened. Multi-Pure Model MP750PlusRO Reverse Osmosis Water Filters work inconjunction with 3 prefilters prior to the reverse osmosis membrane to reduce the chances of the reverse osmosis membrane being contaminated with particles and solids that can cause the lifespan of the reverse osmosis membrane to be shortened... Average influent TDS 765 mg/L Average effluent TDS 23 mg/L Daily Production Rate (DPR) 17.32 gpd Gallons produced per day Efficiency Rating 8.91% Efficiency rating means the percentage of the influent water to the Multi-Pure Reverse Osmosis Systems that is available to the user as reverse osmosis treated water under operating conditions that approximate typical daily usage. Recovery Rating 16.34% Recovery rating means the percentage of the influent water to the reverse osmosis membrane portion of the MultiPure MP750PlusRO Reverse Osmosis System that is available to the user as reverse osmosis treated water when the system is operated without a storage tank or when the storage tank is bypassed. Capacity of Tank 1.8 - 2.5 gallons Depending on the incoming water pressure. Approximate Flow Rate @ 60 psi 0.50 gpm MP750 Plus RO Operation and Maintenance Specifications Depending on water chemistry, water temperature, and water pressure, the MP750 Plus RO System production and performance will vary. Refer to Owner’s Manual for further maintenance requirements and warranty information. Note: This Performance Data Sheet addresses the U.S. Environmental Protection Agency (USEPA) Primary and Secondary Drinking Water Regulations in effect at its time of publication, as they related to Multi-Pure's performance in conformance to the industry performance criteria. These regulations are continually being updated at the Federal level. Accordingly, this list of MCLs will be reviewed and amended when appropriate. Please see sales brochure for list of product certifications. Replacement Filters and Parts Filter life will vary in proportion to the amount of water used and the level of impurities in the water being processed. Replacement filters, membrane, and parts can be purchased directly from Multi-Pure Corporation. Replacement filter model numbers are shown below. The approximate retail price of replacement filters is also shown below. Prices exclude sales tax and shipping and handling fees (*prices subject to change without notice). To dispose of the used filter or membrane, remove it from the housing and place the old filter or membrane in your normal refuse. Carbon filters disposed of in a normal landfill will not release any chemical contamination but will probably continue to adsorb additional contaminants that are disposed of in landfills. Description Model No. Recommended Change Schedule Approximate Price* Sediment Pre-Filter (Stage 1) CBC110 6 months $5.00 5 micron Carbon Pre-Filter (Stages 2 & 3) CBC112 6 months $13.00 Sub micron Carbon Post-Filter CB6 750 gallons (at least once a year) $60.00 RO membrane CB-ROM 2 to 3 years $100.00 California Department of Public Health Certification / Registration Facts About Arsenic (in compliance with NSF Standard 58) Arsenic (abbreviated As) is a naturally occurring contaminant found in many ground waters. Arsenic in water has no color, taste or odor. It must be measured by a lab test. Public water utilities must have their water tested for arsenic. You can get the results from your water utility. If you have your own well, you can have the water tested. The local health department or the state environmental health agency can provide a list of certified labs. The cost is typically $15 to $30. Information about arsenic in water can be found on the Internet at the US Environmental Protection Agency website: There are two forms of arsenic: pentavalent arsenic (also called As(V), As(+5), and arsenate) and trivalent arsenic (also called As(III), As(+3), and arsenite). Special sampling procedures are needed for a lab to determine what type and how much of each type of arsenic is in the water. Check with the labs in your area to see if they can provide this type of service. Reverse Osmosis (RO) systems are very effective at removing pentavalent arsenic. However, RO systems do not remove trivalent arsenic from water very well. A free chlorine residual will rapidly convert trivalent arsenic to pentavalent arsenic. Other water treatment chemicals such as ozone and potassium permanganate will also change trivalent arsenic to pentavalent arsenic. A combined chlorine residual (also called chloramine) may not convert all the trivalent arsenic. If you get your water from a public water utility, contact the utility to find out if free chlorine or combined chlorine is used in the water system. Multi-Pure MP750PlusRO Reverse Osmosis Water Filters are designed to remove only pentavalent arsenic. It will not convert trivalent arsenic to pentavalent arsenic. The MultiPure MP750PlusRO Reverse Osmosis System was tested in a laboratory to remove pentavalent arsenic. Under lab conditions, as defined in NSF/ANSI Standard 58, the system reduced 0.30 mg/L (ppm) pentavalent arsenic to 0.010 mg/L (ppm) (the USEPA standard for drinking water) or less. The performance of the MultiPure Reverse Osmosis System may be different at your installation. Have the treated water tested for arsenic to check if the system is working properly. The RO component (reverse osmosis membrane) of the Multi-Pure MP750PlusRO Reverse Osmosis Water Filter must be replaced as indicated in the Owner's Manual to ensure the water filtration system will continue to remove arsenic and other contaminants. The component identification and locations where you can purchase the component are listed in the installation/operation manual.
Multi-Pure Corporation 800-622-9206 |