Multi-Pure®  High Performance Water Filters

MultiPure Water Filters Provide Superior Quality and Performance No Other Water Filter Can Provide

                                       Patti Wilson Authorized Multi-Pure Independent Distributor #414220
                                                     email: patti@supremedrinkingwatersolutions.com   PH 904 940 4977
MultiPure MP750SC

MultiPure MP750SC Counter Top Drinking Water Filter

MPCT - Stainless Steel Countertop Unit

Multi-Pure MP750SC Counter Top Drinking Water Filter - stainless steel model sits conveniently on your counter next to the sink and is connected with a hose and hi-tech diverter valve to your existing faucet. May be converted to below-the-sink unit with purchase of optional conversion kit. Filter Included...

MultiPure MP750SC Water Filters Reduce A Wide Range Of Contaminants Including Chemicals Found In Herbicides, Pesticides, Petroleum and Cleaning Products and Many More Contaminants Of Health Concern....

Water Filter life/capacity is approximately 750 gallons.
Replacement Water Filter: CB6
Replacement Water Filter Cost: $59.95
Operating Cost: Approximately 8 Cents Per Gallon      List: $379.95          

Use Our MultiPure Discount Coupon Code: 414220-disc

______________________________________________________________________________

FM750SC 
Purchase 10 Replacement Filters and Get The MultiPure MP750SC Water Filter For FREE

                     List Price: $599.50         Purchase From Our Factory Site                                                               
                     
      You'll receive the FREE MP750SC complete with filter and 9 replacement filter coupons...
                           For More Information See Our  FM Products

Specifications:

Housing Composition Stainless Steel

Faucet Composition Chrome Plated Lead-Free

Rubber Items Neoprene

Inlet 3/8” Pipe

Outlet 1/4” Pipe

Replacement Filter Model CB6

Approximate Capacity 1200 Gallons

Approx. Flow Rate 0.75 gpm @ 60 psi

Water Pressure 100 psi max/30 psi min

Weight (Basic Unit) 5.0 lbs.

Height 9.4 inches

Body diameter 6.0 inches

Particulate Retention Size Sub Micron (0.5 micron)

Housing Warranty Lifetime

Performance Data Sheet

Multi-Pure Drinking Water Filters have been tested and certified under NSF/ANSI Standard Nos. 53 as shown below. The concentration of the indicated substances in water entering the MultiPure Water Filter was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53, Health Effects.  

 

For Model Nos. MP750SB, MP1200EL, MP750SC, MP750SI, MPAD, MPCT

Substance           Percent Reduction

Influent challenge :
Maximum permissible product water concentration (mg/L unless specified)

ALACHLOR*
>98% 0.05 0.001

ASBESTOS >99.9% 107 to 108 fibers/L; fibers greater than 10 micrometers in length 99% reduction requirement

ATRAZINE*
>97% 0.1 0.003
 

BENZENE* >99% 0.081 0.001

BROMODICHLOROMETHANE (TTHM)* >99.8% 0.300 +/- 0.30 0.015

BROMOFORM (TTHM)* >99.8% 0.300 +/- 0.30 0.015

CARBOFURAN (Furadan)* >99% 0.19 0.001

CARBON TETRACHLORIDE* 98% 0.078 0.0018

CHLORDANE >99.5% 0.04 +/-10% 0.002

CHLOROBENZENE (Monochlorobenzene)* >99% 0.077 0.001

CHLOROPICRIN* 99% 0.015 0.0002

CHLOROFORM (TTHM)* (surrogate chemical) >99.8% 0.300 +/- 0.30 0.015

Cryptosporidium (CYST) 99.95% minimum 50,000/mL 99.95%

CYST
(Giardia; Cryptosporidium; Entamoeba; Toxoplasma)

99.95% minimum 50,000/mL 99.95%

2, 4-D*
98% 0.110 0.0017

DBCP (see Dibromochloropropane)* >99% 0.052 0.00002

1,2-DCA (see 1,2-DICHLOROETHANE)* 95% 0.088 0.0048

1,1-DCE (see 1,1-DICHLOROETHYLENE)* >99% 0.083 0.001

DIBROMOCHLOROMETHANE
(TTHM;Chlorodibromomethane)*>99.8% 0.300 +/- 0.30 0.015

DIBROMOCHLOROPROPANE
(DBCP)* >99% 0.052 0.00002
 

o-DICHLOROBENZENE (1,2 Dichlorobenzene)* >99% 0.08 0.001

p-DICHLOROBENZENE (para-Dichlorobenzene)* >98% 0.04 0.001

1,2-DICHLOROETHANE (1,2-DCA)* 95% 0.088 0.0048

1,1-DICHLOROETHYLENE (1,1-DCE)* >99% 0.083 0.001

CIS-1,2-DICHLOROETHYLENE* >99% 0.17 0.0005

TRANS-1,2- DICHLOROETHYLENE* >99% 0.086 0.001

1,2-DICHLOROPROPANE (Propylene Dichloride)* >99% 0.08 0.001

CIS-1,3- DICHLOROPROPYLENE* >99% 0.079 0.001

DINOSEB* 99% 0.17 0.0002

EDB (see ETHYLENE DIBROMIDE)* >99% 0.044 0.00002

ENDRIN*
99% 0.053 0.00059

Entamoeba (see CYSTS) 99.95% minimum 50,000/mL 99.95%

ETHYLBENZENE*
>99% 0.088 0.001

ETHYLENE DIBROMIDE
(EDB)* >99% 0.044 0.00002

Furadan (see CARBOFURAN)* >99% 0.19 0.001

**Percent reduction reflects actual performance of Multi-Pure Water Filters as specifically tested (at 200% of capacity). Percent reduction shown for VOCs* reflects the allowable claims for Volatile Organic Chemicals/Compounds as per Tables.

Chloroform was used as a surrogate for VOC reduction claims: the Multi-Pure Water Filters actual reduction rate of

Chloroform was >99.8% as tested (at 200% of capacity). 

Substance Percent Reduction**

Influent challenge concentration (mg/L unless specified)

Maximum permissible product water concentration (mg/L unless specified)

Giardia Lamblia (see CYST) >99.95% minimum 50,000/mL 99.95%

HALOACETONITRILES (HAN)*

BROMOCHLOROACETONITRILE 98% 0.022 0.0005

DIBROMOACETONITRILE 98% 0.024 0.0006

DICHLOROACETONITRILE 98% 0.0096 0.0002

TRICHLOROACETONITRILE 98% 0.015 0.0003

HALOKETONES (HK):*

1,1-DICHLORO-2-PROPANONE 99% 0.0072 0.0001

1,1,1-TRICHLORO-2-PROPANONE 96% 0.0082 0.0003

HEPTACHLOR* >99% 0.25 0.00001

HEPTACHLOR EPOXIDE* 98% 0.0107 0.0002

HEXACHLOROBUTADIENE (Perchlorobutadiene)* >98% 0.044 0.001

HEXACHLOROCYCLOPENTADIENE* >99% 0.060 0.000002

LEAD (pH 6.5) >99.3% 0.15 +/- 10% 0.010

LEAD (pH 8.5) >99.3% 0.15 +/- 10% 0.010

LINDANE* >99% 0.055 0.00001

MERCURY (pH 6.5) >99% 0.006 +/- 10% 0.002

MERCURY (pH 8.5) >99% 0.006 +/- 10% 0.002

METHOXYCHLOR* >99% 0.050 0.0001

Methylbenzene (see TOLUENE)* >99% 0.078 0.001

Monochlorobenzene (see CHLOROBENZENE)* >99% 0.077 0.001

 MTBE (methyl tert-butyl ether) >96.6% 0.015 +/- 20% 0.005

POLYCHLORINATED BIPHENYLS (PCBs , Aroclor 1260) >99.9% 0.01 +/- 10% 0.0005

PCE (see TETRACHLOROETHYLENE)* >99% 0.081 0.001

PENTACHLOROPHENOL*
>99% 0.096 0.001

Perchlorobutadiene (see HEXACHLOROBUTADIENE)* >98% 0.044 0.001

Propylene Dichloride (see 1,2 -DICHLOROPROPANE)* >99% 0.080 0.001

SIMAZINE*
>97% 0.120 0.004

Silvex (see 2,4,5-TP)* 99% 0.270 0.0016

STYRENE
(Vinylbenzene)* >99% 0.15 0.0005

1,1,1-TCA (see 1,1,1 - TRICHLOROETHANE)* 95% 0.084 0.0046

TCE (see TRICHLOROETHYLENE)* >99% 0.180 0.0010

1,1,2,2- TETRACHLOROETHANE*
>99% 0.081 0.001

TETRACHLOROETHYLENE*
>99% 0.081 0.001
 

 

TOLUENE (Methylbenzene)* >99% 0.078 0.001

TOXAPHENE >92.9% 0.015 +/- 10% 0.003

Toxoplasma (see CYSTS) 99.95% minimum 50,000/mL 99.95%

2,4,5-TP
(Silvex)* 99% 0.270 0.0016
 

TRIBROMOACETIC ACID* 0.042 0.001

1,2,4 TRICHLOROBENZENE (Unsymtrichlorobenzene)* >99% 0.160 0.0005

1,1,1-TRICHLOROETHANE (1,1,1-TCA)* 95% 0.084 0.0046

1,1,2-TRICHLOROETHANE* >99% 0.150 0.0005

TRICHLOROETHYLENE (TCE)* >99% 0.180 0.0010

TRIHALOMETHANES (TTHM) (Chloroform; Bromoform;

Bromodichloromethane; Dibromochloromethane)

>99.8% 0.300 +/- 0.30 0.015

TURB
IDITY ( >99% 11 +/- 1 NTU 0.5 NTU

TRICHLOROBENZENE)* >99% 0.160 0.0005

Vinylbenzene (see STYRENE)* >99% 0.150 0.0005

XYLENES
(TOTAL)* >99% 0.070 0.001
 

NOTES:

1. Multi Pure Drinking Water Filters have been certified, as indicated, by NSF International for compliance to NSF/ANSI Standard Nos. 42 & 53.

2. The MultiPure Drinking Water Filters have been certified by the State of California Department of Health Services for the reduction of specific contaminants listed herein.

3. Chloroform was used as a surrogate for claims of reduction of VOCs. MultiPure Water Filters tested at >99.8% actual reduction of Chloroform. Percent reduction shown herein reflects the allowable claims for VOCs as per tables in the Standard.

4. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

MultiPure Water Filters certified for cyst reduction may be used on disinfected water that may contain filterable cysts.5. Water Filter life will vary in proportion to the amount of water used and the level of impurities in the water being processed. For optimum performance, it is essential that the filter be replaced on a regularly scheduled basis as follows: (a) annually; (b) when the unit’s rated capacity has been reached; (c) the flow rate diminishes; (d) the Multi Pure Water Filter becomes saturated with bad tastes and odors.

6. Model No. MP1200EL includes a capacity monitor that automatically flashes a yellow light when it is time to replace your MultiPure Water Filter.

7. Multi-Pure Drinking Water System Housings are warranted for Lifetime (*provided that the water filter be replaced at least once a year). All exterior hoses and attachments to the Multi-Pure Water Filtration System are warranted for one year. Please see the Owner’s Manual for complete product guarantee and warranty information.

8. Please see the Owner’s Manual for installation instructions and operating procedures.

9. In compliance with New York law, it is recommended that before purchasing a water treatment system, NY residents have their water supply tested to determine their actual water treatment needs. Please compare the capabilities of the Multi-Pure unit with your actual water purification needs.

10. Check for compliance with state and local laws and regulations.

11. While testing was performed under standard laboratory conditions, actual performance may vary.

12. The list of substances which the treatment device reduces does not necessarily mean that these substances are present in your tap water.

MP750xx/MPCT MP1200EL MPAD

Approximate Service Capacity (6) 750 gallons 1200 gallons 750 gallons

Replacement Filter Type Model No./ Approx. Cost CB6/$60 CB6/$60 CBAD/$60

Approximate Flow Rate @ 60 psi 0.75 gpm 0.75 gpm 0.75 gpm

Maximum Water Pressure 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2 

Minimum Water Pressure 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2

Maximum Operating Temperature 100°F/38°C

for cold water use only